Shenzhen Seetop Science and Technology Co., Ltd

Model Number: CZ62100CD- Key Specifications/Special Features: Capacities:Max. swing over bed: 1000mmMax.swing over cross slide: 685mmCenter distances: 2m, 3m, 4m, 5m, 6m, 8m, 10m, 12mMax swing over gap: 1,200mmValid length of gap: 300mmBed width: 550mmHeadstock:Spindle hole: 130mmSpindle nose: C-15 or D-15Spindle taper: MT#100Spindle speeds (number): 14-750rpm (18 steps)
Gear box-threads and feed:
Metric threads range (kinds): 1-240mm (54 kinds)
Inch threads range (kinds): 28-1 inch (37 kinds)
Model threads range (kinds): 0.5-60 DP (45 kinds)
Diametral threads range (kinds): 30-1 t.p.I. (27 kinds)
Longitudinal feeds range (kinds): .05-1.42mm/R (72 kinds)
Cross feeds range (kinds): .015-0.48mm/r (72 kinds)
Rapid feed: long/cross6/2m/min
Lead screw size: diameter/pitchT48mm/12mm
Carriage:
Cross slide travel: 400mm
Compound rest travel: 230mm
Size of tll shank: 32*32mm
Tailstock:
Spindle diameter: 100mm or 120mm
Spindle taper: MORSE #5 OR #6
Spindle travel: 205mm
Motor:
Main drive motor: 11kW
Coolant pump motor: 0.09kW
Rapid feed motor: 0.12kW OR 0.18kW
Standard accessories:
Driving plate: Φ350
Three-jaw chuck: Φ325
Three-jaw chuck sect: Φ326
Four-jaw chuck: Φ400
Four-jaw chuck sect
Center
Center sleeve
Tool post spanner
Steady rest: 100-300
Follower rest: 20-135
Iron gasket
Thread dial
Round nut spanner
Optional accessories:
Taper turning attachment: 250mm
Face chuck: 800mm/1000mm
Three-jaw chuck: 400mm
Four-jaw chuck: 630mm